---

ModemHelp.Net Recommends: Free System Scan for PC Errors

Rockwell 28.8 DPI String Explaination

Rockwell 28.8 DPI

AT&F1N0S0=0Q0V1&C1&D2

AT: (beginning of most inits) Attention!

&F1: Sets the values loaded in the active profile to the values that are set in an alternate default profile.

N0: Disable automode

S0=0: Diable autoanswer

Q0: Enable result codes to DTE

V1: This command sets the format for information-text and result codes to Word (verbose) format

&C1: DCD enabled after a carrier signal is detected

&D2: DTR drop causes modem to hang up